Get Adobe Flash player

Từ khóa...

Hỗ trợ trực tuyến

Yahoo Support Liên hệ Hợp Lực
0903 999 763

Yahoo Support Liên hệ Hợp Lực
01678 886 605

Trần Thị Thanh Huyền
Yahoo Support Liên hệ Hợp Lực
0906 057 563

Yahoo Support Liên hệ Hợp Lực

Tỷ giá

Lượt truy cập


Technical characteristics
•Flow rate up to:
- 64 l/h for MAXROY® D105
- 410 l/h for MAXROY® A105
- 420 l/h for MAXROY® B105
- 1100 l/h for MAXROY® B145
•Pressure up to:
- 10 bar for MAXROY® A105 and B145
- 28 bar for MAXROY® B105 and D105
•Maximum temperature of pumped liquid:
- +90 °C for metallic liquid end
- +50 °C for plastic liquid end
•Adjustment of flow rate while running or stopped: from 0 to 100%
•Accuracy: ± 1% of rated flow from 10% to 100% stroke
•Internal safety valve, normally set at the factory
Optional relief valve setting
•Suction lift: up to 2 m water save for "Viscous Liquids" version
•Maximum suction pressure condition: 2 bar
•Working life of the diaphragm can exceed 20,000 hours depending
on the pumped fluid, working conditions and installation
•Single or double diaphragm
•Multiplexing available
•Can comply with API 675
•Explosion-proof version is in accordance with ATEX CE II 2 G/D c T4
(plastic liquid end, please consult us)
Electrical characteristics of motors
Standard motor data:
•Supply: 230/400 V, 3-phase, 50 Hz or 260/460 V, 3-phase, 60 Hz
•IM V1 mounting, FF130 flange, 14x30 mm shaft for
MAXROY® A105, B145 and D105
IM V1 mounting, FF165 flange, 19x40 mm or 24x50 mm shaft
for MAXROY® B105
•Protection: IP 55, tropicalized (90%)
•Insulation: class F
•Ambient temperature: -16 °C to +40 °C
•Motor speed:
- 1000 rpm for MAXROY® A105, B145 and D105
- 1000 or 1500 rpm for MAXROY® B105
•Motors are in accordance with national and international
•Special or specific motors on request