HOPLUC TECHNOLOGY CORPORATION

SITRANS F M MAG 5100 W

Meassuring range	0 to 10 m/s
Nominal Sizes	From DN 25 to DN 2000 (1" to 78")
Accuracy	0.2 % ±2.5 mm/s
Operating Pressure	Max. 16 bar (Max. 150 psi)
Ambient temperature	From -40 to 70 °C (-40 to 158 °F)
Medium Tempreature	From -10 to 70 °C (14 to 158 °F)
Liners	EPDM NBR hard rubber Ebonite hard rubber
Electrodes	Hastelloy C-276 Built-in grounding electrodes
Material	Carbon steel, with corrosion resistant two-component epoxy coating
Drinking Water Approvals	EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS
Custody Transfer Approvals	OILM R 49 MI-001
General approval	MCERTS Sira Certificate No. MC080136/00

Description:

The SITRANS F M MAG 5100 W with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, waste water, sewage or sludge applications.
In order to have a complete flowmeter, please combine it with one of the following MAG transmitters
SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate
The sensor can be combined with the energy calculator SITRANS FUE950

Application examples: Water abstraction, Water distribution network, Custody transfer water meters and Waste water

Benefits:

Rugged NBR hard rubber liner for all water and wastewater applications
EPDM liner specifically for drinking water applications requiring special approvals
Ebonite liner for all drinking water, water and wastewater applications
Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
Suitable for direct burial and constant flooding (IP68)
Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint