CÔNG TY CỔ PHẦN CÔNG NGHỆ HỢP LỰC

SITRANS FC430

Sizes		DN15 (½") DN25 (1") DN50 (2") DN80 (3")
Accuracy		±0.10%
Repeatability		±0.05%
Flow range (water @ 1 bar pressure loss)		DN15: 3700 kg/h (8157 lb/h) DN25: 11500 kg/h (25353 lb/h) DN50: 52000 kg/h (114640 lb/h) DN80: 136000 kg/h (300000 lb/h)
Architecture		Compact or remote configuration with selection of twelve languages including Chinese and Russian
Display		Full graphical display, 240 x 160 pixels
Power Supply		24 to 90 V DC, 100 to 240 V AC
Weight		4,6 - 50 kg
Materials	Sensor:	Wetted parts: 316L stainless steel Enclosure: 304 stainless steel
Materials	Transmitter:	Aluminium with corrosion-resistant coating
Enclosure rating (IP)		IP 67
Pressure ratings	Measuring tubes	100 bar (1450 psi)
	Sensor enclosure	20 bar (DN15, DN25) 17 bar (DN50, DN80)
	Sensor enclosure burst pressure	>160 bar (all sizes)
Temperature ratings	Process medium	-50 to 200 °C (-58 to 392 °F)
Temperature ratings	Ambient	-40 to 60 °C (-40 to 140 °F)
Process connections	Flanges	EN1092-1 B1, EN1092-1 D, ANSI / ASME B16.5, JIS B 2220
	Pipe threads	ASME B1.20 (NPT), ISO228-1 G (BSPP), VCO Quick-connect
	Hygienic threads	DIN11851, DIN11864-1, ISO2853, SMS 1145
	Hygienic clamps	DIN11864-2, DIN32676, ISO2852
Approvals	Hazardous area	ATEX, IECEx, cFMus, NEPSI, CSA, TISS, GOST
	Pressure equipment	PED, CRN
	Hygienic	3A, EHEDG
	Custody transfer SITRANS FC430	OIML R117
	Operational safety (compact system only)	SIL2 (Sensor) SIL3 (Transmitter and redundant system)
NAMUR		Complying with NE132, NE41
I/O		Up to 4 channels combining analog, relay or digital outputs and binary input
Communication		HART 7.2
EMC performance		EN 61326-3-2
Mechanical load		18 to 1000 Hz random, 3.17 G rms, in all directions

Description:

The sensor is protected in a pressure-rated stainless steel enclosure. In non-Ex applications, two purge ports support installation of a pressure guard. The modular transmitter is designed for compact and remote installation, easy to mount on a wall or pipe.The complete flowmeter system SITRANS FC430 can be ordered for standard, hygienic or NAMUR service. All versions can be ordered for CT service, according to OIML R117 (Liquids other than water)
All compact variants can be validated and configured for SIL2 or SIL3 operation as standard. SIL3 operation requires two flowmeters in series and monitored by a SIL rated control system. The flowmeter is based on the latest developments within digital signal processing technology – engineered for high measuring performance:
Fast response to rapid changes in flow
Fast dosing applications
High immunity against process noise
High turndown ratio of flowrates
Suitable for liquid and gas service
Easy to install, commission and maintain
FC430 is available as standard with 4-20 mA analog output with HART 7.2. Additional input/output functions can be freely configured for analog, pulse, frequency, relay or statusThe transmitter comes with a user configurable graphical display and new SensorFlash® technology, a micro SD card for configuration backup, firmware update and data storage
The SITRANS FC430 flowmeter system consists of a SITRANS FCS400 sensor and a SITRANS FCT030 transmitter

Benefits:

It is narrow and light, fitting neatly into dense piping arrangements
Easy maintenance because modules can be exchanged rapidly
Effective separation of measurement from plant vibration
Highly secure operation in safety critical applications
Non-volatile memory of all setup and operation data
Reliable measurements due to high signal to noise ratio
Secure, digital transfer of measurement data from the Sensor
SensorFlash transfers setup and operating data, providing simple sensor replacement
Short overall length; easy drop-in replacement into most existing installations