CÔNG TY CỔ PHẦN CÔNG NGHỆ HỢP LỰC

SITRANS FCS400

Sizes		DN15 (½") DN25 (1") DN50 (2") DN80 (3")
Accuracy		±0.10%
Repeatability		±0.05%
Flow range		DN15: 3700 kg/h (8157 lb/h) DN25: 11500 kg/h (25353 lb/h) DN50: 52000 kg/h (114640 lb/h) DN80: 136000 kg/h (300000 lb/h)
Weight		4,6 - 50 kg
Material		Wetted parts: 316L stainless steel Enclosure: 304 stainless steel
Enclosure rating (IP)		IP 67
Pressure ratings		100 bar (1450 psi)
Temperature rating		-50 to 200 °C (-58 to 392 °F)
Ambient temperature		-40 to 60 °C (-40 to 140 °F)
Process connections	Flanges	EN1092-1 B1, EN1092-1 D, ANSI / ASME B16.5, JIS B 2220
	Pipe threads	ASME B1.20 (NPT), ISO228-1 G (BSPP), VCO Quick-connect
	Hygienic threads	DIN11851, DIN11864-1, ISO2853, SMS 1145
	Hygienic clamps	DIN11864-2, DIN32676, ISO2852, SMS 1145
Approvals	Hazardous area	ATEX, IECEx, FM, NEPSI, CSA, TISS, GOST
	Pressure equipment	PED, CRN
	Hygenic	3A, EHEDG
	Compact system SITRANS FC430	OIML R117
Certificates		ATEX, IECEx, FM, NEPSI, CSA, TISS, GOST, PED, CRN, 3A, EHEDG
	Compact system SITRANS FC430	OIML R 117

Description:

The sensor design consists of process connections, inlet and outlet manifolds mounted in a stiff frame and two parallel tubes equally sharing the process medium flow. The sensor is protected in a pressure-rated stainless steel enclosure. In non-Ex applications, two purge ports support installation of a pressure guard
The sensing tubes have a CompactCurve™ design which gives high sensitivity and low pressure loss. The CompactCurve™ was selected to ensure that the smallest flows are measured with optimal signal to noise ratio
The sensor frame isolates the metering section from plant vibration by conducting them directly through to adjacent pipeline. Careful mounting of the pipeline with regard to minimizing vibration at the meter will ensure a secure measurement environment
In order to make a complete flowmeter system, the SITRANS FCS400 flow sensor must be combined with the transmitter SITRANS FCT030

Features

High measurement frequency
High signal to noise ratio
Digital signal transfer
SensorFlash® removable SD card transfers setup and operating data
SIL3 safety integration certified at design level
Certified for custody transfer

Typical applications: Dosing within chemical industry (dosing of chemicals), Food & beverage industry (beer, juices, liquid such as chocolate, dressings) and Automotive industry (Engine test rigs)

Benefits:

Reliable measurements due to high signal to noise ratio
Effective separation of measurement from plant vibration
Secure, digital transfer of measurement data to the Transmitter
Highly secure operation in safety critical applications
Because it is narrow and light, it fits neatly into dense piping arrangements
Short overall length; easy drop-in replacement into most existing installation
Easy maintenance because modules can be exchanged rapidly
SensorFlash transfers setup and operating data and provides simple sensor replacement