Hotline
0903 999 763
Application
MultiRanger 200 HMI can be used with various materials, including, water, municipal waste, acids, woodchips, or on materials with high angles of repose. MultiRanger 200 HMI offers true dual point monitoring, digital communications with built-in Modbus
RTU via RS 485, as well as compatibility with SIMATIC PDM, allowing PC configuration and set-up. MultiRanger 200 HMI features Sonic Intelligence advanced echo-processing software for increased reading reliability.
MultiRanger 200 HMI will monitor open channel flow and features more advanced relay alarming and pump control functions as well as volume conversion.
It is compatible with chemical-resistant EchoMax transducers that are approved for hostile environments.
• Key Applications: wet wells, flumes/weirs, bar screen control, hoppers, chemical storage, liquid storage, crusher bins, dry solids storage
Benefits
• Easy to use HMI display with local four-button programming, menu-driven parameters, and Wizard support for key applications
• English, German, French, Spanish, Chinese, Italian, Portuguese, and Russian texts on the HMI
• Removable terminal blocks for ease of wiring
• Digital input for back-up level override from point level device
• Communication using built-in Modbus RTU via RS 485 and SIMATIC PDM configuration software
• Compatible with SmartLinx system: PROFIBUS DP, PROFINET (cyclic access of process values only), DeviceNet, Modbus TCP/IP, and EtherNet/IP
• Single or dual point level monitoring
• Auto False-Echo Suppression for fixed obstruction avoidance
• Differential amplifier transceiver for common mode noise reduction and improved signal-to-noise ratio
• Level, volume, and flow measurements in open channels, differential control, extended pump control, and alarm functions
• Wall and panel mounting options
Technical specifications
|
Mode of Operation Measuring principle Measuring range Measuring points |
Ultrasonic level measurement 1 or 2 |
|
Input Analog Discrete
|
0 ... 20 mA or 4 ... 20 mA, from alternate device, scalable 10 ... 50 V DC switching level Logical 0 ≤ 0.5 V DC Logical 1 = 10 ... 50 V DC max. 3 mA |
|
Output EchoMax transducer Ultrasonic transducer
Relays mA output • Max. load • Resolution |
44 kHz Compatible transducers: ST-H and EchoMax series XPS-10, XPS-15/15F, and XRS-5 Rating 5 A at 250 V AC, non-inductive 0 ... 20 mA or 4 ... 20 mA 750 Ω, isolated 0.1 % of range
|
|
Accuracy Error in measurement Resolution Temperature compensation
|
0.25 % of range or 6 mm (0.24 inch), whichever is greater 0.1 % of measuring range1) or 2 mm (0.08 inch), whichever is greater • -50 ... +150 °C (-58 ... +302 °F) • Integral temperature sensor • External TS-3 temperature sensor (optional) • Programmable fixed temperature values |
|
Rated operating conditions Installation conditions • Location • Installation category • Pollution degree Ambient conditions • Ambient temperature (housing) • Storage temperature |
Indoor/outdoor II 4
-20 ... +50 °C (-4 ... +122 °F) -20 ... +50 °C (-4 ... +122 °F) |
|
Design Weight • Wall mount • Panel mount Material (enclosure) Degree of protection (enclosure) • Wall mount • Panel mount Electrical connection • Transducer and mA output signal
• Max. separation between transducer and transceiver |
1.22 kg (2.68 lb) 1.35 kg (2.97 lb) Polycarbonate
IP65/Type 4X/NEMA 4X IP54/Type 3/NEMA 3
2-core copper conductor, twisted, shielded, 0.5 ... 0.75 mm² (22 ... 18 AWG), Belden 8760 or equivalent is acceptable
365 m (1 200 ft) |
|
Displays and controls |
60 x 40 mm (2.36 x 1.57 inch) LCD 240 x 160 pixels resolution |
|
Power supply AC version DC version |
100...230 V AC ± 15 %, 50/60 Hz, 36 VA (17 W) 12 ... 30 V DC (20 W) |
|
Communication |
• RS 232 with Modbus RTU or ASCII via RJ-11 connector • RS 485 with Modbus RTU or ASCII via terminal strips • Optional: SmartLinx cards for - PROFIBUS DP-V1, PROFINET (cyclic access of process values only) - DeviceNet, Modbus TCP/IP, EtherNet/IP |
