SA Multi-turn Actuators - hopluc.com.vn

Home / Products / ACTUATORS/DOSING PUMP / ACTUATORS / SA Multi-turn Actuators

SA Multi-turn Actuators

SA 07.2 – SA 16.2 AND SA 25.1 – SA 48.1
> Torques: 10 Nm – 32,000 Nm
> Automation of gate and globe valves

SA MULTI-TURN ACTUATORS FOR OPEN-CLOSE DUTY

The following data applies to actuators with 3-phase motors, operated in type of duty S2 - 15 min/classes A and B in compliance with
EN 15714-2. For further information on other motor types and types of duty, refer to separate technical and electrical data sheets.

Type	Output speeds at 50 Hz1	Setting range for tripping torque	Number of starts Starts max.	Valve mounting flange
	[rpm]	[Nm]	[1/h]	EN ISO 5210	DIN 3210
SA 07.2	4 – 180	10 – 30	60	F07 or F10	G0
SA 07.6	4 – 180	20 – 60	60	F07 or F10	G0
SA 10.2	4 – 180	40 – 120	60	F10	G0
SA 14.2	4 – 180	100 – 250	60	F14	G1/2
SA 14.6	4 – 180	200 – 500	60	F14	G1/2
SA 16.2	4 – 180	400 – 1,000	60	F16	G3
SA 25.1	4 – 90	630 – 2,000	40	F25	G4
SA 30.1	4 – 90	1,250 – 4,000	40	F30	G5
SA 35.1	4 – 45	2,500 – 8,000	30	F35	G6
SA 40.1	4 – 32	5,000 – 16,000	20	F40	G7
SA 48.1	4 – 16	10,000 – 32,000	20	F48	–

SAR MULTI-TURN ACTUATORS FOR MODULATING DUTY

The following data applies to actuators with 3-phase motors, operated in type of duty S4 - 25 %/class C in compliance with EN 15714-2.
For further information on other motor types and types of duty, please refer to separate technical and electrical data sheets

Type	Output speeds at 50 Hz1	Setting range for tripping torque	Maximum torque for modulating duty	Number of starts Starts max.2	Valve mounting flange
	[rpm]	[Nm]	[Nm]	[1/h]	EN ISO 5210	DIN 3210
SAR 07.2	4 – 90	15 – 30	15	1,500	F07 or F10	G0
SAR 07.6	4 – 90	30 – 60	30	1,500	F07 or F10	G0
SAR 10.2	4 – 90	60 – 120	60	1,500	F10	G0
SAR 14.2	4 – 90	120 – 250	120	1,200	F14	G1/2
SAR 14.6	4 – 90	250 – 500	200	1,200	F14	G1/2
SAR 16.2	4 – 90	500 – 1,000	400	900	F16	G3
SAR 25.1	4 – 11	1,000 – 2,000	800	300	F25	G4
SAR 30.1	4 – 11	2,000 – 4,000	1,600	300	F30	G5