Hotline
0903 999 763
Accurate process monitoring of dissolved oxygen in water for precise aeration control
Hach's next generation DO Probe, the LDO sc Model 2 (Luminescent Dissolved Oxygen), accurately measures dissolved oxygen levels in water by utilizing luminescent dissolved oxygen technology within the O2 sensor (oxygen sensor) cap ensuring high levels of accuracy. The Hach LDO probe requires no calibration and can be used right out of the box. Using this DO probe to monitor dissolved oxygen levels in your water applications saves time and money through minimum maintenance (no electrolyte solution) and overall reduction in aeration blower energy usage.
An improved body design optimizes the probe’s temperature sensor to provide an even faster response time to process variability as well. The probe comes with a three year warranty, and the sensor cap has a two year warranty.
-
No Calibration Required
-
No Membranes to Replace
-
No Missed Cleaning Cycles
-
No Drift
-
No Complications
Specifications*
|
Range |
0 to 20.00 ppm 0 to 20.0 mg/L (or ppm) 0 to 200 % air saturation |
|
Accuracy |
± 0.05 ppm below 1 ppm ± 0.1 ppm below 5 ppm ± 0.2 ppm above 5 ppm |
|
Response Time |
T95 < 60 s T90 <40 s |
|
Resolution |
0.01 ppm DO 0.1% saturation |
|
Repeatability |
± 0.1 (mg/L) ppm |
|
Flow Rate |
None required |
|
Sensor Immersion Depth |
Down to 345 kPa 345 kPa (50 psi), maximum; accuracy may not be maintained at this depth |
|
Transmission Distance |
1000 m (3280 ft.) maximum when used with a termination box |
|
Cable Length |
10 m (options with 30m, 60m, 100m) |
|
Dimensions (D x L) |
1.9 in x 10 in (48.25 mm x 254 mm) |
|
Weight |
2.2 lbs. (1 kg), probe only |
